background image

Service Manual

Philips Consumer Lifestyle

Published by Philips Consumer Lifestyle 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

 

Boiler Steam Iron

GC7320

09/04

PRODUCT INFORMATION

Features

Iron
- Careeza soleplate
-  Steam rate (Max): 110 g/min
-  Steam trigger with lock
-  Steam hose length: 1.8 m

Stand
- Inox boiler
-  Boiler pressure: 4.5 bar
-  Fixed water tank volume: 1.0 L
-  Cord length: 2.0 m
-  Flex & hose-cord storage hook
- Easy rinse

Safety Information

-  This product meets the requirements regarding 

interference suppression on radio and TV.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down as this moment.

TECHNICAL INFORMATION

Voltage  

: 220 - 240 V

Frequency 

:  50 - 60 Hz

Power Iron 

800 

W

  

Boiler 

: 1370 

W

Dimension (F-box) 

:  350 x 350 x 250 mm (L x W x H)

Weight (with packing)  :  6.4 kg

Water advice

If the tap water in your area is very hard, it is advisable to mix 
the tap water with an equal amount of demineralised water.

Easy to rinse

The new design of the rinse cap makes it very easy to rinse 
the boiler regularly.  Simply unscrew the cap and pour out the 
“dirty” water into the sink.
No hassle with coins, extra tubes or anything of this sort.

Fixed water tank

The fi xed water tank that is incorporated into the stand allows 
re-fi lling anytime during ironing.  Since water is not re-fi lled 
directly into the boiler, there is no waiting time for boiler to 
cool down.

Summary of Contents for GC7320








Reviews: