11
3
Close the battery compartment.
Note
If you are not going to use the remote control
•
for a long time, remove the batteries.
Do not use old and new or different types of
•
batteries in combination.
Batteries contain chemical substances, so they
•
should be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto
»
install - press the PLAY button) is
displayed.
2
Press
on the main unit to start
installation.
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
»
stations with suf
fi
cient signal strength.
When all the available radio stations
»
are stored, the
fi
rst preset radio station
is broadcast automatically.
3
1
2
Connect power
Caution
Risk of product damage! Ensure that the
•
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
Before connecting the AC power cord, ensure
•
you have completed all other connections.
Note
The type plate is located on the back of the
•
main unit.
1
If your power supply voltage is 110V-
127V, adjust the voltage selector to 110V-
127V.
2
Connect the AC power cable to:
the main unit.
•
the wall socket.
•
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
•
heat, sunshine or
fi
re. Never discard batteries
in
fi
re.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
AM ANTENNA
FM ANTENNA
SPEAKERS 6
Ω
+
-
AUX/CDR IN
R L
L
R
L
R
LOW CH
English
EN
FWM416_78_EN.indd Sec1:11
FWM416_78_EN.indd Sec1:11
4/10/2009 4:55:16 PM
4/10/2009 4:55:16 PM
