26
English
3139 115 21281
Tuning to a weak radio station
●
Press
à
or
á
briefly and repeatedly until the
optimal reception is found.
To stop storing the manual preset
●
Press
Ç
on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "
PROGRAM FULL
" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
Tuning to Preset Radio Stations
●
Once you’ve preset the radio stations, press
í
or
ë
to select the desired preset number.
➜
The preset number, radio frequency, and
waveband will appear on the display.
Erasing a Preset Radio Station
1
Press
í
or
ë
to select the preset radio station
to be erased.
2
Press and hold
Ç
on the system until “
PRESET
DELETED
” appears on the display.
➜
The radio frequency remain on the display.
➜
The preset numbers of all other preset radio
stations in the band with higher numbers are also
decreased by one.
●
Repeat
steps 1–2
to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
Radio Reception
Changing Tuning Grid
In some countries, the frequency step between
adjacent channels in the MW band is 10 kHz (9
kHz in some areas). The preset frequency step
in the factory is 9 kHz.
Changing the tuning grid will erase all
previously stored preset radio stations.
1
Disconnect the system from the AC power
supply (pull out the AC power cord).
2
While holding down
TUNER
and
á
on the
system, reconnect the system to the AC power
supply.
➜
The display will show "
GRID 9
" or
"
GRID 10
".
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
pg 001-035/V795/21-Eng
4/16/02, 6:44 PM
26
