Clock setting
Automatic clock setting
It is possible to set the clock by using a time signal which is
broadcast together with the RDS signal.This only works if
the RDS station is sending this time signal.
1
Tune to an RDS station (see “Tuner”).
2
Press CLOCK·TIMER on the set for more than 5 seconds.
➜
RDS CLOCK
blinks for a maximum of 90 seconds.Then
the time is displayed.
➜
If
NO RDS CLOCK
is displayed, there is no time signal
transmitted. In that case you have to tune to another
RDS station or set the clock manually.
Note:The time signal broadcast from certain RDS stations may
not always be accurate. If you find there a discrepancy in clock
time, set your clock manually and the time will then run
accurately.
Manual clock setting
1
Press
2
STANDBY·ON as often as necessary on the set
to switch the set to standby.
2
Press CLOCK·TIMER on the set.
3
Rotate
í
JOG CONTROL
ë
to select the clock.
➜
CLOCK
is displayed and
X
starts blinking.
4
Press YES to confirm the selection.
➜
The day of the week digit blinks.
5
Rotate
í
JOG CONTROL
ë
to set the day.
6
Use
à
SEARCH or
á
SEARCH on the set to move
from day of the week to hour.
7
Rotate
í
JOG CONTROL
ë
to set the hour.
8
Repeat steps 6 and 7 to set the minutes.
9
Press YES to confirm the settings.
Timer functions
You can select 2 timer functions which will be activated at a
chosen time: alarm timer and sleep timer. Make sure the
clock is set before using one of these features.
Alarm timer setting
The set can be used as an alarm clock, whereby the tuner,
CD changer or CD recorder starts playback automatically
at a preset time.
1
Follow steps 1 and 2 of “Manual clock setting”.
2
Rotate
í
JOG CONTROL
ë
to select the alarm timer.
➜
ALARM
is displayed and
ALARM
is blinking.
3
Press YES to confirm the selection.
➜
The hour digit will blink.
4
Rotate
í
JOG CONTROL
ë
to set the hour.
5
Use
à
SEARCH or
á
SEARCH on the set to move
from hour to minutes.
6
Rotate
í
JOG CONTROL
ë
to set the minutes.
7
Press YES to confirm the time settings.
8
Rotate
í
JOG CONTROL
ë
to select the source you
want to be woken up with.
9
Press YES on the set to confirm the source selection.
Switching the alarm timer on/off
●
Press TIMER ON/OFF on the remote control repeatedly to
switch the alarm timer on or off:
➜
ALARM
is shown and
ALARM ON
is displayed: the alarm
timer is switched on.
➜
ALARM
goes off and
ALARM OFF
is displayed: the alarm
timer is switched off.
0
0
To stop the alarm press
2
STANDBY·ON on the set.
Sleep timer
You can set a certain period of time before the set switches off.
1
Press SLEEP repeatedly on the remote control until the
desired sleeper time is displayed.
➜
SLEEP
is shown and
SLEEP 15 MIN
,
30 MIN
,
45 MIN
,
60 MIN
or
SLEEP OFF
is displayed.
2
As soon as the desired time is displayed, do not press
SLEEP again.
➜
After the chosen time has elapsed, the set switches to
standby.
●
To deactivate the sleep timer, press SLEEP on the remote
control until
SLEEP OFF
is displayed.
Clock and timer
26
English
CD CHANGE
OPEN•CLOSE
STANDBY
•
ON
ECO POWER
DISPLAY/RDS
CLOCK
•
TIMER
SOURCE
CD RECORDER
CDR
OPEN•CLOSE
MASTER
VOLUME
COPY
CD
COMPILE
CD
RECORD
FINALIZE
ERASE
JOG
CONTRO
L
CD
ON
•
OFF
LEVEL
CDR
CD1
CD2
CD3
TUNER
AUX
