Philips FM-2, Service Manual

Page: 28 / 110

Supported Modems
16 Chapter 2 - System Interfaces
The components of the default initialization string are explained in the
following table.
For detailed information about the MultiTech Systems MT-5600ZDX and how
to set it, please refer to the modem’s Owner’s Manual.
Table 2 MultiTech MT-5600ZDX initialization string
commands
Command Explanation
E0 Switches to verbose mode. To establish whether a modem
connection is effective, the modem replies to the signal sent
by the monitor with an ‘OK’ signal, or an error signal, rather
than just a result code (e.g. 0, 1, etc.). If an ‘OK’ is received,
then it is positive confirmation that the modem is connected
and functional.
X4 Switches to extended result codes, along with smart dialling.
The modem checks for a dial tone, dials, then checks for a
ring back or a busy signal after dialling.
This is not appropriate in local exchange branches.
X0 Selects basic result codes and blind dialling (dials even if there
is no line), as an alternative to use in local exchange branches.
&K0 No modem initiated flow control (disables the flow control).
150
US
20
TOCO
(5)
JANE DOE 194848
16:34:12 2/14/2001
cm
min.
3
Communications Menu
Paper Output Current Record
Paper Speed
(3 cm/min)
Paper Style
Number to Dial
Return
Data Transfer Stopped
Destination
Printer/Recorder
Modem Initialization
OK Cancel Clear
Set Modem Init String
0
T X