Philips Fisio 620, User Manual

Page: 31 / 88

29
Settings
4 The next carousel menu allows you to Delete or Play the voice tag,
Change the function associated with this voice tag or Change the voice
tag used for this function.
5 Repeat the steps described above to add more voice commands. Then
make a short press on
e
to go back to the previous menu or a long
press to go back to idle.
6 To activate a feature using the voice command, press and hold
,
when
in idle mode, then say the recorded voice tag.
Words recorded as voice tags can be played, changed or deleted at any time.
You can also set a voice tag for a voice dial instead of a voice command (see
“Voice dial” page 12).
L
The duration of a voice tag is 2 seconds. Up to 15 voice tags can be defined and
shared between voice dial and voice command.
Network
This menu allows you to handle the connection between the phone and the
network, register manually the available networks and manage your preferred
networks.
GPRS attach
GPRS (Global Packet Radio Service) is a new mobile service allowing you to
exchange data with high speed rates and to stay always online (i.e. have a
permanent connection to the Internet and WAP). Your phone allows you to
fully benefit from GPRS access in WAP and Internet.
L
In order to use the GPRS services, contact your GSM operator for an appropriate
subscription. You might also need to configure your phone with the GPRS settings
supplied by your operator, by using the menus described in this section.
This menu allows you to define the attach mode of your mobile phone to the
GPRS service:
-
At switch on : your phone will always register to the GPRS service. This option
allows faster GPRS connection. However it will increase energy consumption.
- For data calls only: your phone will automatically register to the GPRS service
only when required. This option allows to reduce energy consumption,
however it will increase the connection delay.
GPRS attach
Fisio620_GB_4311 255 53481.book Page 29 Jeudi, 28. février 2002 1:26 13