FC8451/01
3-8
M
R5
U1
TR1
Motor
TMP
27-¼W
R3
10M-¼W
R4
10M-¼W
L
N
AC
220 - 240 V
50 Hz
C1
0.47
F
275V
C3
22nF
ZD1
4.7V
½ W
C2
220
F
16V
D1
1N4007
R2
10k-1W
R1
10k-1W
RW
47k
K
4
7
10
9
6
5
8
11
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
ELECTRICAL DIAGRAM
• To replace the parkhook (
13
), first remove Screw
C
,
then by pushing the two lips with a screwdriver the
parkhook can be removed (see picture).
C
• To replace the cordwinder (
20
), first remove the
wires, the locks can be unlocked with a screw driver
(see picture).
• The safety valve assy (
21
) can be clogged with dust, it can
be easily taken out and replaced after the tophousing has
been removed, it must be done from inside the bottom
housing where the cordwinder is situated (see picture).
• When replacing the motor, make sure that the two red
wires are placed underneath the motor.
• To replace the caster assy (
11
), squeeze the 2 dividers
in the middle of the hole of the caster arm together
with pliers, at the same time pull the caster assy off
(see picture). The new caster assy can be snapped on in
one single move.
