background image

FC8451/01

2-8

DISASSEMBLY- AND  RE-ASSEMBLY ADVISE

•  First remove the dust bag.
•  To replace the wheels (

10

), first turn the appliance 

upside down.  To remove the wheel on the left side (seen 
from the backside), push with a screwdriver the nocks 
from the inside out, and pull the wheel out (see picture).

•  To remove the wheel on the cordwinder side, pull the 

wheel with great force from the lower housing.
To place a wheel, click the wheel into the lower housing.

•  To reach te inner parts for repair, the top housing (

15

has to be removed.

•  Remove the dustcover assy (

1

) using a screwdriver

(see picture).

•  When the dustcover has been removed, 2 of the 4 

screws 

B

 that need to be unscrewed to disassemble the 

tophousing (

15

) are accessible (see picture).

B

B

• The 3

th

 screw 

B

 is hidden under the On/Off pedal (

12

), 

to remove the pedal use a screwdriver (see picture).

B

•  Finally the last screw 

B

 that need to be removed is 

situated at the bottom side of the appliance (see picture).

B

•  To separate the top housing from the bottom housing 

release the snap connection behind the wheel at the 
cordwinder side (see picture).

Summary of Contents for FC8450/01









Reviews: