Philips Essence HR7758, Recipes & Directions For Use

Page: 19 / 270

19 19
ENGLISH
9 Lubricate the discs and the worm shaft
with some vegetable oil before storing
them.
Storage
C
◗
Wind the mains cord round the reel on the
back of the appliance.
Micro Store
C
◗
Place the tool holder in the bowl.Then put
the blade (with grey protecting cover), the
kneading accessory and the adjustable slicing
disc on the tool holder and close the bowl
with the lid.
Guarantee & service
If you need information or if you have a problem,
please visit the Philips Web site at
www.philips.com or contact the Philips Customer
Care Centre in your country (you will find its
phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or
contact the Service Department of Philips
Domestic Appliances and Personal Care BV.
Solution
Turn the bowl and the lid in the direction of the arrow
until you hear a click. Make sure the dot on the bowl
and the dot on the lid are directly opposite each other.
Check whether the screw cap has been assembled
properly.The groove on the screw cap must be
opposite the groove on the motor unit and the two
grooves together must form one long groove. If the
blender is attached, remove it and attach the screw cap
instead, for the food processor does not work when the
blender is attached.
The automatic thermal cut-out has probably cut off the
power supply to the appliance because it has
overheated. 1) Unplug the appliance. 2) Let the
appliance cool down for 60 minutes. 3) Put the mains
plug in the socket. 4) Switch the appliance on again.
Press the button for the process you want.
This appliance is equipped with a memory function. If
you restart the appliance within 40 seconds, the process
will start where it was interrupted. If you want the
process to start right from the beginning: 1) Briefly press
another process (e.g. the pulse button) 2) Then press
the stop button. 3) Press the appropriate process
button to make the process start all over again.
Make sure you have assembled the kneading accessory
properly onto the tool holder.
If both the blender jar and the food processing bowl
have been mounted correctly, only the blender will
function. If you want to use the food processing bowl,
detach the blender jar and close the fixing hole with the
screw cap.
Problem
The food processor
does not work.
The appliance has
suddenly stopped
running.
You have pressed the
wrong process button.
The process doesn't
start at the beginning
after a restart.
The kneading
accessory doesn't turn.
Both the blender jar
and the food
processing bowl are
attached, but only the
blender works.
Troubleshooting guide