4-9
Remote reception is insensitive or fails.
No
Remote reception is
insensitive or fails.
Check if the remote
control works properly.
Check battery
Check R315
、
C315
Use an oscilloscope to check if there is
output waveform from the first pin IR of the
remote censor after pressing button on the
remote control.
REM301(PIN1 - RC
waveform)
Check if there is IR
signal on pin 33 of U20
Check if the power supply
voltage to the remote censor
is normal
Go
No
No
No
Yes
Yes
Yes
Correct connection
Yes
Change U20
IR
waveform
Trouble shooting chart