8
4 Get
started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see “1” in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long
•
time, remove the batteries.
Do not use old and new or different types of batteries
•
in combination.
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1
Press to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Select menu display language
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Select
[OSD Language]
, and then press .
3
Press to select a language, and then press
OK
.
1
Connect the audio cables (supplied) to:
the
•
AUDIO OUT L/R
jacks on this
product.
the audio input jacks on the device.
•
Connect USB flash drive
1
Connect a USB flash drive to the
jack on
this product.
Note
This product can only play/view MP3, WMA, DivX
•
(Ultra) or JPEG files that are stored on a USB flash drive.
Press the
•
button to access the content and play
the files.
Connect power
Caution
Risk of product damage! Ensure that the power supply
•
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.
•
1
Connect the AC power cable to the wall
socket.
The product is ready to be set up for use.
»
DVD PLAYER DVP3550K
EN
