English
Timer Recording (cont’d)
29
●
If you are recording from other equipment, select L
1
or
L2.To determine L
1
or L2, refer to the Helpful Hints.
●
If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Details are on page
1
0.
9
Press
K
or
L
to select a recording tape speed.
The arrow
will appear beside your choice.The selected speed will flash
beside REC SPEED.
Details about tape speed are on page 60.
• To stop a started timer recording,
press STOP/EJECT
C A
(VCR) on
the front of the DVD/VCR. (You
cannot stop a started timer
recording with STOP
C
on the
remote.)
More Helpful Hints are
on page 62
.
• To change incorrect information,
press
s
or
B
to choose the
item you want to change. Press
K
or
L
to adjust the
information
.
•
While a timer recording is set
and “
” is on, pressing
STOP/EJECT
C
A
(VCR) will
turn on the DVD/VCR and/or
cancel the timer recording.The
“
” will disappear. Press
STOP/EJECT
C
A
(VCR) again to
remove the tape. Insert a tape
and press TIMER SET to reset
the timer recording.
• If there is no tape in the VCR
when you press TIMER SET,
“
” will flash. Insert a tape.
• If one or more Timer recordings
are on standby when one timer
recording ends, the DVD/VCR
will turn off automatically and
“
” will appear on the
DVD/VCR's display panel
indicating that it is now ready for
another timer recording.
Helpful Hints
PROGRAM NUMBER 1
DATE
0 5 / 0 3 WED
START TIME
0 7 : 3 0 P M
END TIME
0 8 : 3 0 P M
CHANNEL 16
REC SPEED
S P
B
SP
SLP
ONE TIME PROGRAM
10
Press CLEAR/RESET
to store the timer recording.
11
Press TIMER SET.
The DVD/VCR will turn off and “
” will
appear in the display panel. In some cases, the DVD/VCR will
switch to DVD mode instead.You may use the DVD player
during a timer recording.
If you want to use the VCR until time for the recording, don’t
press TIMER SET until a few minutes before the recording
should start. Or, press TIMER SET only when you know you
won’t be using the VCR anymore (until after the recording).
When “
” appears, you cannot put the DVD/VCR in VCR
mode by pressing VCR or SOURCE.You must first press TIMER
SET to cancel the timer recording temporarily.Then, you can
use the VCR features again.
When a timer recording ends
The DVD/VCR will turn off and “
” on the DVD/VCR's display panel
will flash indicating that the recording is complete. Or it may switch to
DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual.
Cancelling Timer Recordings
1
Press VCR, then press DISC/VCR MENU
so MENU
appears.
2
Press
K
or
L
to select TIMER PROGRAMMING,
then press
B
.
3
Press
K
or
L
to find the program you want to
cancel.
4
While the program number is flashing, press
s
to
clear all the information for that program.
5
Press CLEAR/RESET to remove the menu.
STANDBY-ON
PLAY
DVD
VCR
VCR/TV
OK
MENU
MENU
DISC/VCR
RETURN
TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE
ZOOM
ANGLE
REPEAT
REPEAT
AUDIO
SEARCH
MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSE
STOP
MARKER
RECORD
TIMER SET
SPEED
1
2
3
7
6
5
4
8
9
0
+10
9
10
11
H982NUD_EN1 3/2/06 6:56 PM Page 29
