8
1
Turn on the TV to the correct viewing channel
for this product.
2
Press
SETUP
.
3
Press
to select
[Video Setup]
.
4
Select
[Progressive]
>
[On]
, then press
OK
.
A warning message is displayed.
»
5
To proceed, select
[Ok]
and press
OK
.
The progressive setup is complete.
»
Note
If a blank/distorted screen is displayed, wait for 15
•
seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press
•
to open the disc compartment.
2) Press the
•
Numeric button ‘1’
.
6
Press
SETUP
to exit the menu.
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for
•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc
•
compartment.
Do not touch the disc optical lens inside the disc
•
compartment.
1
Press
to open the disc compartment.
2
Insert a disc with its label facing up.
3
Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the remote
•
control is not to be used for a long time.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the correct viewing channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
Select menu display language
The language options may vary from
•
different regions.
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Select
[OSD language]
, then press .
3
Press
to select a language, then press
OK
.
Turn on progressive scan
Note
To use the progressive scan feature, you must connect
•
a progressive scan TV with the component video jacks
(see “Connect” > “Connect video cables” > “Option 1:
Connect to the component video jacks” for details).
EN