Philips DVP 5140K, User Manual

Page: 31 / 43

English
31
DVD Setup Menu Options
Audio Setup Menu
1
In disc mode, press SETUP .
2
Press
1 2
to select ‘Audio Setup’ icon.
3
Press OK to confirm.
Go to Audio Setup Page
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
- - Audio Setup Page - -
Analog Output
This options allows you to set the stereo
analog output of your DVD player.
1
In ‘AUDIO SETUP PAGE’, press
3 4
to
highlight {ANALOG OUTPUT}, then
press
2
.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Multi Channel
Select this to enable Multi-channel output.
2
Press
3 4
to select a setting, then press
OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1
In ‘AUDIO SETUP PAGE’, press
3 4
to
highlight {DIGITAL AUDIO SETUP}, then
press
2
.
2
Press the
3 4
keys to highlight an option.
3
Enter its submenu by pressing
2
.
4
Press
3 4
to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off : Turn off the digital output.
➜
All : If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only : Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful hint:
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K : Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K : Playback a disc recorded at the
sampling rate of 96kHz. This rate can only
be achieved in Stereo-Classic (Flat) mode.
TIPS: The underlined option is the factory default setting.
Press
1
to go back to the previous menu item. Press SETUP to exit the menu item.
01-43 DVP5140K_93_engRC4 11/07/06, 1:27 PM 31