67
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white
OUT L AUDIO R
,
OUT
AUDIO LR
jacks), select '
Off
' in the '
Digital output
' menu.
Sound
Digital output
All
Analog output
Stereo
Night mode
Off
'
Digital output
'
You can select from the following settings for devices connected to the
DIGITAL AUDIO
OUT
jack:
'
All
'
: Dolby Digital signals are going out unchanged to the digital output. MPEG-2 multi-channel
signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers
with a digital multi?channel sound decoder
.
'
PCM only
'
: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers
without a digital multi?channel sound decoder
.
'
Off
'
: digital output is off.
For devices
with an analog audio input
.
'
Analog output
'
You can select from the following settings for devices connected to the analog outputs (
OUT L
AUDIO R
,
OUT AUDIO LR
).
'
Stereo
'
: For devices that use neither DolbySurround nor TruSurround. Only use this setting
when the DVD Recorder is connected to a stereo TV.
'
Surround
'
: Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible
two-channel output signal.
For devices
with a Dolby Surround / Pro Logic decoder
.
'
Night mode
'
Night mode optimizes the sound dynamics at low volume. This causes less disturbance in quiet
environments. This setting only functions with Dolby Digital Audio on DVDs.
ENGLISH
User preferences
