64
Problem solving for programmed
recordings
PROBLEM
SOLUTION
DVD Recorder does not
respond
b
While a programmed recording is being made, you cannot operate your DVD Recorder
manually. If you want to cancel the programmed recording, press
STANDBY
m
.
'
Switch off, timer recording
'
flashes on the TV screen.
b
The DVD Recorder was switched on a few minutes before the start of a programmed
recording.
Turn off the DVD Recorder by pressing
STANDBY
m
. A programmed recording (timer)
will only function if the DVD Recorder is switched off (button
STANDBY
m
).
Fehlermeldung: '
Insert
recordable disc
'
b
Either no disc was inserted or a disc was inserted that cannot be used for recordings. Insert a
disc that can be recorded upon. Turn off the DVD Recorder by pressing
STANDBY
m
.
The error message '
Disc
locked
' appears briefly on
the screen.
b
A protected disc was inserted. Undo the erase protection (chapter 'Manual recording', section
'Preventing accidental erasing of discs '), or insert a different disc.
Error message: '
Memory
full
'
b
If this error message appears after pressing
TIMER
, then all TIMER blocks are already
programmed. No more recordings can be programmed. Press the
C
button. Select the
programmed recording (TIMER block) you want to check or clear using
CH+
A
or
CH-
B
.
The '
Data error
' message
appears on the screen.
b
The data for the recording could not be transferred. Please check date, start time, and end
time of the programmed recording.
The message '
Collision
'
appears on the screen.
b
The timer recording overlaps with another timer recording.
b
If you ignore this warning, the programmed recording with the early start time will start first.
The second recording will then lack the beginning.
b
Change the information for one of the two recordings.
b
Delete one of the two recordings.
Programming a recording (TIMER)