14
Connecting with a S?Video (Y/C) cable
This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y
signal) and color signal (C signal) separately. This mini DIN jack/plug is also called a Hosiden
jack/plug.
Have the following cables ready:
an antenna cable (1, supplied), a power cable (2, supplied), a S-video (SVHS) cable (3), an audio
cable (4, with red/white ends).
1
Remove the antenna cable plug from your TV. Insert it into the
ANTENNA IN
jack at the back of the DVD recorder.
2
Insert one end of the supplied antenna cable into the
TV
OUT
jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.
3
Use a S-Video (SVHS) cable and plug one end into the
S-VIDEO
(Y/C) OUT
jack at the back of the DVD Recorder and the other
end into the S-Video (SVHS) In jack of the TV (usually called
S-Video in or SVHS in. See your TV's instruction manual).
4
Use an audio (cinch) cable and plug one end into the red/white
cinch jack
AUDIO L/R OUT
at the back of the DVD Recorder
(next to
S-VIDEO (Y/C) OUT
) and the other into the
corresponding red/white audio input jack of the TV (usually called
Audio in', 'AV in'. See your TV's instruction manual).
5
Switch on the TV. Then switch the set to the SVHS input jack or
select the corresponding channel number. For the channel
number, please see your TV's instruction manual.
6
Connect the mains jack
4
MAINS
at the back of the DVD
Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear
on the display.
After the initial installation is completed, this function will be
switched off. How you switch on this function again, read in the
chapter 'User preferences' in the section 'Standby'.
7
Press
STANDBY-ON
m
on the recorder. '
IS TV ON?
' will
appear on the display.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.
Connecting the DVD Recorder
Summary of Contents for DVDR 615/17
Page 12: ......