9
English
Preparation
General Notes
¶
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
¶
Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
¶
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
Optional Equipment’.
Caution:
– Make sure the DVD player is connected directly
to the TV. Set the TV to the correct video input
channel.
– Do not connect the player’s audio out jack to
the phono in jack of your audio system.
– Do not connect your DVD player to the TV via
your VCR. The DVD image could be distorted by
the copy protection system.
Connecting to a TV
¶
Make one of the following connections, depending on the
capabilities of your existing equipment.
SCART connection
1
Connect the SCART to the corresponding connector on
the TV using the SCART cable supplied
(Z)
.
If your TV is not equipped with a SCART you can select
one of the following alternative connections:
S-Video (Y/C) connection
1
Connect the Y/C S-VIDEO OUT jack on the DVD player to
the S-Video in jack on the TV using an optional S-Video
cable
(Y)
.
2
Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV
(A)
.
CVBS connection
1
Connect the (CVBS) VIDEO OUT jack on the DVD player
to the video in jack on the TV using the video cable
supplied
(X)
.
2
Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV
(A)
.
TV
Z
Y
X
A
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
I
AUX/VCR
IN
II
TV OUT
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
P
b
/C
b
P
r
/C
r
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
Component Video (Pr/Cr Pb/Cb Y)
connection
1
Connect either S-Video or CVBS video out jack to TV as
above diagram.
2
Turn on the TV and go to Personal Preference menu
(see
Personal Preference).
3
Select the video output from RGB (default) to Pr/Cr Pb/Cb Y.
4
Connect the Pr/Cr Pb/Cb Y VIDEO OUT jacks on the DVD
player to the corresponding in jacks on the TV using an
optional Pr/Cr Pb/Cb Y cable
(W)
.
5
Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on the TV
(A)
.
W
TV
A
II
TV OUT
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
Pb/Cb
Pr/Cr
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
P
REPARATION
