E
n
g
li
sh
CHANGING THE SETTINGS OF YOUR RECEIVER
19
5.2.3.2 VCR
This item is used to select the format of the
output signal for the VCR SCART socket.
- Scroll to the setting you want to change.
The corresponding values are displayed on the
right-hand side of the screen.
- Press the
i
button to access the available
values:
• Video Output: CVBS-PAL, or Y/C. CVBS-
PAL is the default and recommended
setting.
• Easy Record: select the control method
that suits your VCR. Refer to your VCR
user manual.
5.2.3.3 Digital audio output
Select AC3 (digital audio 5.
1
) only if your
receiver is connected to a Dolby Digital home
entertainment system. For recordings, AC3 will
be switched off automatically.
5.2.3.4 Channel Banner
This item is used to select the channel banner
display duration and transparency.
- Scroll to the setting you want to change.
The corresponding values are displayed on
the right-hand side of the screen.
- Press the
i
button to access the available
values.
5.2.3.5 Volume
This item is used to select the volume level at
start-up.
- Press the
i
button to change the level
setting.
- Press
t
or
y
to modify the volume level.
- Press <OK> to confirm.
5.2.3.6 Remote Control
This item is used to set the remote control
address.
- Press the
i
button to access the available
values.
- Move to the address you want to select.
Default address is 039.
- Press <OK> to confirm your selection.
- Proceed as described in paragraph 7.
1
.
If you do not complete the procedure
as described in paragraph 7.
1
, you will
not be able to control your receiver
using your remote control.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 19
