English
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome
.
General
The Philips wrist blood pressure monitor with
Bluetooth® enables you to perform blood pressure
measurements, heart rate (pulse) measurements,
transmit data via Bluetooth® to your mobile device
and display your personal measurement results in
the Philips HealthSuite health app. The device can
also be used as a standalone device.
This user manual contains important safety infor
mation and provides step-by-step instructions for
using the blood pressure monitor.
Read this information carefully before you use the
blood pressure monitor and save it for future refer
ence.
Features:
- 46.8mm×29.3mm display with white backlight
- Measure-during-inflation technology
- Supports 2 users
Intended use
The Philips wrist blood pressure monitor is a digital
monitor intended for use in measuring blood pres
sure and heart rate in adult patient population,
with wrist circumference ranging from 13.5 cm to
21.5 cm (about 5-8.5 inches). The device is intend
ed to be used in a home environment.
The warning signs and symbols are essential to
ensure that you use this product safely and cor
rectly and to protect you and others from injury.
Below you find the meaning of the warning signs
and symbols on the label and in the user manual.
Symbol for 'follow instructions for use'.
This symbol means that the part of the
device that comes into physical contact
with the user (also known as the applied
part) is of type BF (Body Floating) accord
ing to IEC 60601-1. The applied part is the
cuff.
Symbol for 'the device complies with
European Medical Device Directive
93/42/EEC requirements'. 0344 refers to
the notified body.
Symbol for WEEE, waste electrical and
electronical equipment. Electrical waste
products should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice
and see chapter 'Battery recycling'.
This symbol means that this product con
tains batteries which shall not be disposed
of with normal household waste
(2006/66/EC).
Indicates the manufacturer, as defined in
EU Directives 93/42/EEC.
Indicates manufacturing date.
Symbol for 'direct current'.
Symbol for the 'Bluetooth Combination
mark'. The device uses Bluetooth for com
munication.
Indicates the manufacturer's batch code.
Indicates the manufacturer's serial num
ber so that a specific medical device can
be identified.
Fuse T1A/250V
Φ
3.6*10CCC.
Symbol for 'Class II Equipment'. The
adapter is double insulated (Class II) and
complies with IEC 60601-1.
Symbol for indoor use only.
12
5
7
9
10
11
6
8
1
2
3
4
13
14
15
16
17
1
