Recyclage
- Ce symbole signifie que ce produit ne doit pas
être mis au rebut avec les ordures ménagères
(2012/19/EU) (Fig. 20).
- This symbol means that this product contains
batteries which shall not be disposed of with
normal household waste (2006/66/EC) (Fig.
21).
- Follow your country's rules for the separate col
lection of electrical and electronic products and
batteries. Correct disposal helps prevent nega
tive consequences for the environment and hu
man health.
Removing disposable batteries
To remove disposable batteries, see the instruc
tions for placing and/or removing batteries in the
user manual.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
If
you need more information about the app,
please visit www.philips.com/healthprograms
Troubleshooting
This chapter summarizes the most common pro
blems you could encounter with the appliance. If
you are unable to solve the problem with the infor
mation below, visit www.philips.com/support for a
list of frequently asked questions or contact the
Consumer Care Center in your country.
Problem
Possible
cause
Solution
The device
does not re
spond or re
sets automati
cally when I
pull out the
battery strip.
The batteries
are empty.
Replace the batte
ries.
The poles of
the batteries
point in the
wrong direc
tion.
Remove the batte
ries and reinsert
them properly.
The batteries
are not ma
king proper
contact.
Remove the batte
ries and reinsert
them properly.
The measu
red tempera
ture is lower
than
32.4°C/90.3°F
or higher
than
42.9°C/109.2°
F.
Follow the instruc
tions in the user
manual for proper
measurement.
The device is
malfunctio
ning.
Contact the Phi
lips Consumer
Care Center in
your country.
Temperature
is out of tem
perature mea
suring range.
Use the thermome
ter in the range of
operating condi
tions (see 'Specifi
cations').
The thermo
meter seems
to be inaccu
rate or the
measurement
results seem
questionable.
The infrared
sensor is not
clean en
ough.
Clean the infrared
sensor with a cot
ton swab accor
ding to user ma
nual.
You are not
measuring
temperature
in the correct
way.
Make sure that
you have read the
user manual and
know how to use
the device proper
ly.
Your room
temperature
is too low or
too high.
Use your thermo
meter at room
temperatures bet
ween 10.0°C and
40.0°C (50.0°F
and 104.0°F).
You are using
the device
outdoors.
The device is only
intended for in
door use.
You have
held the de
vice in your
hand too
long.
Put the device on
the table in the
room where the
measurement is ta
king place and let
it cool down first.
The battery
symbol
flashes on
the display.
The batteries
are empty.
Replace the emp
ty batteries with
new ones.
The display
shows Err0
Self-test er
ror
Remove and re
place the batte
ries. If the error
persists, contact
Philips Consumer
Care Center in
your country .
The display
shows Err2
Stabilization
error
Wait 30 minutes
and measure
again.
The display
shows Err3
Battery level
low
Replace the emp
ty batteries with
new ones.
Explanation of symbols
The warning signs and symbols are essential to en
sure that you use this product safely and correctly
and to protect you and others from injury. Below
you find the meaning of the warning signs and sym
bols on the label and in the user manual.