Recording
EOL
(End-of-Letter)
Inserting Text
Recording for the first time with the DPM 9220
: Check that the DPM has power - the batteries
have been inserted correctly! Then unlock the „on/off“ switch on the back of the device.
Ending the dictation
Press the EOL button (4) on the DPM 9220: When you are finished with the dictation and do not wish to
make any further changes. This only functions if the device is in stop mode and something has already been
recorded to the file!
The functions of the EOL button are as follows:
• Pressing the EOL button once marks the current file as finished. The file is closed and assigned the
EOL symbol: .
After closing the file, the device automatically creates a new, empty file.
Inserting text into the current file:
Move the playback cursor to the corresponding location in the file.
Stop the playback. Press the INS/OVR button followed by the REC button and dictate your addition.
(In insertion mode the LED glows green!)
Inserting text into a saved audio file:
Select the corresponding file using the Jog Dial and confirm the
selection by pressing on the Jog Dial. Unlock it by pressing the EOL button ... then follow the steps
described above.
To end the process:
Either press the fast-forward/reverse position or press the REC button and end
the insertion mode by pressing the INS/OVR button again. (Press the EOL button again.)
Quick Reference
Manual
1.
4.
MIC
2.b
2.a
3.
(Inserting: LED green)
(Recording: LED steady red)
Hold the DPM approximately 10 centimetres away
from your mouth. Speak clearly.
Starting recording:
Press the REC button.
LED steady red.
For short pauses:
Press the REC button ->
Recording stops.
Continuing recording:
Press the REC button again.
Stopping recording:
Press the REC button = stop mode.
Back side:
EOL button
