12
EN
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
1
Press for over 3 seconds to switch the
unit to Eco Power Standby mode.
»
The backlight on the display panel
turns off.
To switch the unit to standby mode:
1
In Eco Power Standby mode, press for
over 3 seconds.
»
The clock (if set) appears on the
display panel.
Set clock
1
In standby mode, press and hold
PROG
/
CLOCK SET
for more than two
seconds to activate clock setting mode.
»
[CLOCK SET]
(clock set) scrolls on
the display, and then the time format
[24H]
and
[12H]
is displayed.
2
Press / to select 24H or 12H, and
then press
PROG
/
CLOCK SET
.
»
The hour digits begin to blink.
3
Press / to set hour, and then press
PROG
/
CLOCK SET
again.
»
The minute digits begin to blink.
4
Press / to set minute.
5
Press
PROG
/
CLOCK SET
to confirm the
clock setting.
Note
•
To exit clock setting mode without storing, press .
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Demonstrate the unit's
features
1
In the standby mode, press until "DEMO
ON" is displayed.
»
This system's features are displayed
one by one.
•
To turn off the demonstration, press
again.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press
FM
.
»
[AUTO INSTALL -- PRESS PLAY --
STOP CANCEL]
(press
to start
automatic installation, or press to
cancel) is displayed.
3
Press
.
»
The radio stations with sufficient signal
strength are stored automatically.
»
After all available radio stations are
stored, the first stored radio station
broadcasts automatically.
DCM2025_12_UM_Book1_V3.0.indb 12
9/26/2012 3:30:21 PM