Philips Cucina HR7640, Recipes & Directions For Use

Page: 13 / 152

13
Cleaning
Always unplug the appliance before you start
cleaning the motor unit.
1 Clean the motor unit with a damp cloth.
Do not immerse the motor unit in water
and do not rinse it either.
2 Always clean the parts that have come
into contact with food in hot water with
washing-up liquid immediately after use.
◗
The bowl, the lid of the bowl, the pusher and
the accessories can also be cleaned in a
dishwasher.
These parts have been tested for dishwasher
resistance according to DIN EN 12875.
The cover with insert storage space and the
blender jar are not dishwasherproof!
Clean the blade, the knife unit of the blender and
the inserts very carefully. Their cutting edges are
very sharp!
Make sure that the cutting edges of the blade, the
blade unit of the blender and the inserts do not
come in contact with hard objects. This could
cause them to become blunt.
Certain ingredients may cause discolourations on
the surface of the accessories. This does not have
a negative effect on the accessories. The
discolourations usually disappear after some time.
Quantities
5-25g
10-50 g
25-75 g
25-75 g
25-75 g
25-50 g
50-100 g
20-40 g
10-30 g
50-100 g
20-50 g
Ingredients
pepper corns
sesame seeds
rice, wheat
soy beans
dried peas
coconut
hard (e.g. Parmesan) cheese
bread crumbs
sugar cubes
nuts (shelled)
coffee beans
C
3 Press and turn clockwise until the blade
unit is properly fixed.
C
4 Turn the assembled mill upside down and
screw it onto the motor unit.
After processing, unscrew the mill from the
motor housing:
C
5 Pull the safety ring out and turn it anti-
clockwise. Than remove the blade unit.
The mill is suitable for grinding e.g. ingredients as
mentioned in the table. Do not exceed the
quantities!
ENGLISH