ColorBlast TRX Product Guide
10
Install Spread Lenses and Accessories
(Optional)
Designed specifically for the family of Blast fixtures by City Theatrical, Inc., spread
lenses and accessories provide additional options for controlling and dispersing light.
Spread lenses and accessories slip into the accessory holder, which is designed to
accommodate one spread lens and one accessory (barn door, top hat, half top hat,
or egg crate louver) simultaneously. Captive thumbscrews hold spread lenses and
accessories firmly in place, and prevent them from falling out if the fixture is tipped
or hung upside down.
1. If hanging a ColorBlast TRX fixture upside down (clamped to a pipe, for example),
flip the accessory holder as follows:
Using a flathead screwdriver, remove the lockdown screws from the four
▪
corners of the accessory holder.
Remove the accessory holder from the fixture housing, and reverse its
▪
orientation.
Re-install the accessory holder using the four lockdown screws.
▪
2. Loosen the two captive thumbscrews located on the upper edge of the accessory
holder, and pivot the top of the accessory holder back to expose the slot.
