Philips Colgate SonicPro 10 PC0810/01, Manual

Page: 9 / 46

9
English
Getting started
Attaching the brush head
1
Align the brush head so the bristles point in the
same direction as the front of the handle.
2
Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the
brush head and the handle. This allows the brush
head to vibrate properly.
Charging your SonicPro
1 Plug the USB charging cord into a wall adapter that
is connected to a electrical outlet.
2 Place the handle on the charger.
- The light of the battery level indicator
illuminates and the handle beeps twice. This
indicates that the toothbrush is charging.
Note: It can take up to 24 hours to fully charge the
battery, but you can use the SonicPro toothbrush
before it is fully charged.
Using your SonicPro
If you are using your SonicPro toothbrush for the first
time, it is normal to feel more vibration than when
using a non-electric toothbrush. It is common for first
time users to apply too much pressure. Only apply
gentle pressure and let the toothbrush do the
brushing for you. Please follow brushing instructions
below for the best experience. To help you transition
to your new SonicPro power toothbrush, it comes with
the EasyStart feature turned on. This feature gently
increases the power over the first 14 brushings to help