Service Modes, Error Codes, and Fault Finding
5.
Figure 5-17 Example UART log during SWUPG startup (DVD down).
UªUretail Jan 16 2008 12:03:04
Boot deviceST NAND512W3A
BFFS init
OK
Searching BootLoader.tdfLoad /bffs0/BootLoader.tdf- Done
Start /bffs0/BootLoader.tdf
JBL (boottime improvement
BootLoader OS_R0.7.2assert Feb 25 2008 12:49:28Searching boot.bat
Execute /bffs2/boot.bat from label [6]
unknown command, line 302
Execute /bffs1/boot.bat from label [6]
* boot1: SR6->USB SW DL boot1
* On error goto 70
* Load /bffs1/Kernel.tdf - ok
* Load /bffs1/RFSBoot1.tdf - ok
* MemFill 0x87fff000 0x1000 0xff
* Signal 30
* Cmd Line
CMD_LINE arguments passed by JBL : console=ttyS0,38400n8 mem=60M kgdb=ttyS1 loglevel=3 init=/init ip=none root=/dev/ram lpj=1196032 rd_start=0x80500000 rd_
size=1818624* Start /bffs1/Kernel.tdf"htv520EU/92 startup script ..."
"Mounting file systems"
Total usertime mount for /proc: 0,000000 [Sec]
Total systemtime mount for /proc: 0,000000 [Sec]
Total usertime mount for /sys: 0,000000 [Sec]
Total systemtime mount for /sys: 0,000000 [Sec]
Total usertime mount for /dev/shm: 0,000000 [Sec]
Total systemtime mount for /dev/shm: 0,000000 [Sec]
Total usertime mount for /dev/pts: 0,000000 [Sec]
Total systemtime mount for /dev/pts: 0,000000 [Sec]
"Loading PNX5100 Image"
"Launching SW Download Application From Boot1"
checking hotboot: NO
Standby version 40.x.0.0
start_Init clearing m_InitDoneBlunk
Using errlib version 0.9
Errlib 0.9 registered from process 147
3562 - ReferenRW partition: 4
mounting partition 4 to jffs2 file system passed
RW partition: 5
mounting partition 5 to jffs2 file system passed
mounted: </dev/mtdblock6>
Mount check passes, 0 iterations
mounted: </dev/mtdblock7>
Mount check passes, 0 iterations
pffsN_OnMounted sets m_InitDoneBlunk to true
InitCehtvData done
ReadCehtvData ConfigVersion: [0.01] OK
ReadCehtvData ProductID: [Q591E] OK
ReadCehtvData OUI: [0000903E] OK
ReadCehtvData HardwareModel: [0203] OK
ReadCehtvData HardwareVersion: [0100] OK
ConvertAscii2Bin started
ConvertAscii2Bin done
ConvertAscii2Bin started
ConvertAscii2Bin done
ReadCehtvData PublicKey: OK
ReadCehtvData done, ConfigOK: TRUE
Could allocate 36701184.
Startup m_InitDoneBlunk: 1, m_InitDoneMain: 1
/mnt/jffs0/rupg/tvplf/cetv/display found - Layoutcheck OK
Display flash file : Layout version = 8 ; Contentversion = 17
Display flash file : Project Id = 1 ; Branch Id = 0
version string: DISPT_001.000.008.017
Using screen option 142, name LCD LGD WUF SAA1 42"
MMIO address obtained from pnx5xxx drv = 0x28000000
redirecting 1 to 22
00 005.181 redirecting 2 to 23
00 005.185 ***GVC: T2 - ceisusb_m.c (951): "usbdevspN_OnDeviceError( DeviceUnknownAttachedError, -1 )" notification given
00 005.187 ***GVC: T2 - ceisusb_m.c (951): "usbdevspN_OnDeviceError( DeviceUnknownAttachedError, -1 )" notification given
00 005.188 ***GVC: T2 - ceisusb_m.c (951): "usbdevspN_OnDeviceError( DeviceUnknownAttachedError, -1 )" notification given
00 005.190 ***GVC: T2 - ceisusb_m.c (951): "usbdevspN_OnDeviceError( DeviceUnknownAttachedError, -1 )" notification given
00 005.192 ***GVC: T2 - ceisusb_m.c (817): "usbdevspN_OnPhysicalDeviceConnected( 0 )" notification given...
00 005.364 startr_init
00 005.364 Startup m_InitDoneBlunk: 1, m_InitDoneMain: 1
00 005.465 gfxptr: 2dea0000
00 005.465 malloc 776605704
00 005.465 Starting STi710x device with i2c protocol version v0.5 !
00 005.471 ST TurnOn first attemptS18,0,Q591E_0.39.0.0
00 005.806 Go!!!!!!!
00 005.910 Por: 1
00 005.920 ST start up OKST SW Version: MPEG4.001.000.000.029
00 005.930 ST HW Version: MP4HW.000.000.012.002
00 005.932 Amount of upgs on usb 0
00 005.934 No upg files found!
00 009.212 ***GVC: T2 - ceisusb_m.c (1199): "usbdevspN_OnNewDevice( 0 )" notification given.
00 009.297 ***GVC: T2 - ceisusb_m.c (1408): "usbdevspN_OnDriveMounted( 0 )" notification given
00 009.299 OnDriveMounted : 0
00 009.586 ceapps OnUpgradesChanged : 0
00 009.594 Amount of upgs on usb 20
00 009.854 20 upgs found on USB. Press right to enter the list.
I_17662_00
3
.ep
s
11060
8