Philips CID3687, User Manual

Page: 10 / 36

10
4
Fix the mounting brackets to the
unit with screws (supplied by the car
manufacturer).
5
Slide the unit into the dashboard and fix
it to the car with four screws.
Mount in the dashboard
Note
Check wire connections before you mount the
•
unit into a car.
If preset radio stations are lost when the
•
ignition key is turned OFF and then back ON,
reconnect the red leads crosswise to the
yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in •
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
If the car battery is not disconnected,
•
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening’s slant angle is above
20 degrees.
3
Fix the four plastic buckles (supplied by
the car manufacturer for the original
audio system) to the unit.
EN