2. On Center, insert the upgrading CD into the CD slot loader, with
CD graphic printed side facing you
→
Upgrading starts automatically
→
The display shows “
Updating firmware, please wait……
” .
A progress bar appears
→
Center will reboot itself twice during the upgrading process
→
After about 5 minutes, Center returns to HD mode. The upgrading is
completed
(Note:
- Keep your Center turned on during the upgrading.)
Upgrade WAS700 Station:
3. Press
STANDBY-ON
to turn WAS700 Station
→
Upgrading starts automatically
→
The display shows “
Updating firmware, please wait……
” .
A progress bar appears
→
Station will reboot itself twice during the upgrading process
→
After about 5 minutes, Station returns to HD mode. The upgrading is
completed
(Note:
- Keep your Station turned on during the upgrading.)
Helpful hints:
-
To check the firmware version, see Preparation: Verifying firmware
version.
- If you have any problem, see
troubleshooting
.
