14
Note
Please consult your Phillips dealer or
•
distributer to purchase the CEA100 external
navigation box.
Mount in the dashboard
Note
Check wire connection before you mount the
•
unit into a car.
If preset radio stations are lost when the
•
ignition key is turned OFF and then back ON,
reconnect the red leads crosswise to the
yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in
•
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
If the car battery is not disconnected,
•
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
CEA100
7
Black wire
Front line out Left/
Right
8
Blue cable
Subwoofer
9
Red cable
Aux Right
10
White cable
Aux Left
11
Yellow cable
Video in
12
Yellow cable
Camera in
13
Yellow cable
Video out 1
14
Yellow cable
Video out 2
15
Purple wire
Reverse camera (B+)
16
Gearbox switch
17
Reverse gear
signal
Back lamp lead +
Connect radio antenna
Connect the radio antenna to the radio
antenna of the system for better radio signal.
1
Connect the radio antenna to the car
antenna.
Connect external navigation box
This unit supports GPS navigation by
connecting Philips CEA100 external GPS
navigation box.
EN
