9
Connect the woofer/tweeter to the network
Note
Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality.
•
Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the amplifier. Most two
•
channel amplifiers work well in this configuration. However, if two 4-ohm speakers, wired in parallel to a
bridged two -channel amplifier, present a 2-ohm mono load to the amplifier. Most 2-channel amplifiers do
not support 2-ohm mono operation! Amplifier damage may result!
1
Connect the woofers and the tweeters to the 2-way crossover network first, then connect the
network to your amplifier or car audio directly.
White lined
White lined
White lined
Amplifier
Network
Woofer
Tweeter
Black
Black
Black
English
EN