15
EN
5
Press
SLEEP/TIMER
to confirm.
»
The hour digits begin to blink.
6
Press
PRESET/ALBUM
/ to set the
hour.
7
Press
SLEEP/TIMER
to confirm.
»
The minute digits begin to blink.
8
Press
PRESET/ALBUM
/ to set the
minute.
9
Press
SLEEP/TIMER
to confirm.
»
The
[VOL]
(volume) begins to blink.
10
Press
PRESET/ALBUM
/ to adjust
the volume, then press
SLEEP/TIMER
to
confirm.
»
The timer is set and activated.
Tip
•
For source selection, you can also press
VOL -/+
,
PRESET/ALBUM
/ on the remote control, or
/ ,
VOLUME
on the main unit.
•
For hour/minute/volume adjustment, you can also press
VOL -/+
on the remote control, or / ,
VOLUME
on the main unit.
Activate and deactivate the alarm
timer
1
Press to switch the unit to standby
mode.
2
Press
SLEEP/TIMER
repeatedly to activate
or deactivate the timer.
»
If the timer is activated, the display
shows .
»
If the timer is deactivated,
disappears on the display.
Note
•
In audio in and Bluetooth mode, the alarm timer cannot
be set.
•
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
Play from external audio
device
You can play from an external audio device
such as MP3 player through this unit.
1
Connect the audio device.
•
For audio device with red/white audio
output sockets:
Connect a red/white audio cable (not
supplied) to the
AUX-IN
sockets and
to the audio output sockets on the
audio device.
•
For audio device with headphone
sockets:
Connect the audio in cable (not
supplied) to the
AUDIO IN
socket
and to the headphone socket on the
audio device.
2
Press
SOURCE
to select
AUDIO IN
or
AUX
source.
3
Play the external audio device.
Adjust display brightness
Note
•
You can adjust the display brightness in standby mode
only.
In standby mode, press
RDS
/
DISPLAY
repeatedly to adjust display brightness.
• Full brightness (100%)
• Half brightness (70%)
• Brightness low (40%)
Headphone
Plug headphones (not supplied) into the
socket on the unit to listen through the
headphones.
Summary of Contents for BTM5000
Page 2: ......
