- Follow your country’s rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Removing the rechargeable battery
Only remove the rechargeable battery when
you discard the product. Before you remove
the battery, make sure that the product is
disconnected from the wall socket and that
the battery is completely empty.
Take any necessary safety precautions when
you handle tools to open the product and
when you dispose of the rechargeable battery.
1 Take the comb and the cutting element from
the handle and remove the deco panel above
the zoom wheel by using a flathead screwdriver.
2 Remove one screw above the zoom wheel and
one screw on the bottom of the appliance.
3 Remove the frame by placing the flathead
screwdriver on the top.
4 Remove two screws from the front top of the
appliance.
5 Insert the screwdriver in-between the zoom
wheel and the front shell and twist the
screwdriver to release the click. Do this on both
sides.
6 Remove two screws on the top of the
appliance.
7 Take out the inner body and slide off the motor
cover and zoom wheel construction.
8 Break six clicks with a flathead screwdriver and
lift the cover with a flat head screwdriver.
9 Take out the circuit board with a flathead
screwdriver.
10 Break the battery tags and remove the
batteries.
Warning: The battery tags can be very sharp.
Warranty and support
If you need information or support, please visit
www.philips.com/support
or read the
international warranty leaflet.
Warranty restrictions
Cutting units are not covered by the terms of the
international warranty because they are subject to
wear.
