Philips BSC431, Manual

Page: 15 / 61

2 Remove the brush head from the appliance (Fig. 12).
3 Clean the bottom of the brush head and the connection pin of the
appliance under the tap at least once a week (Fig. 13).
4 Dry the brush head and the appliance with a towel.
5 Place the attachment on the storage palette (if you have one) and
leave it to dry.
Cleaning the adapter and the charging stand
Danger: Always keep the adapter dry. Never rinse it
under the tap or immerse it in water.
1 Make sure the adapter is unplugged when you clean it. Only wipe
it with a dry cloth.
2 Always detach the charging stand from the adapter before you
clean it (Fig. 14).
3 You can clean the charging stand with a moist cloth. Dry the
charging stand before you reconnect it to the adapter (Fig. 15).
Charging
Charging the appliance
Note: Charge the appliance before you use it.
Charging the appliance for the first time takes approximately 6 hours.
A fully charged appliance can be used for at least 1 week without
charging, according to the recommended usage per specific
attachment.
1 Make sure the appliance is switched off.
2 Insert the small plug into the socket of the charging stand (Fig. 16).
Put the adapter in the wall socket.
3 Remove the protection cap (Fig. 17).
4 Place the appliance upright into the charging stand, make sure
that it is placed properly (Fig. 18).
5 The charging light flashes white to indicate that the appliance is
charging. When the battery is fully charged, the charging light lights
up white continuously for 30 minutes (Fig. 19).
15 English