6
2. Setting up the Display
Connecting to your PC
13
11
USB UP
3
2
1
4
5
6
7
8
Fast Charger
12
10
9
1
USB downstream
2
USB downstream/USB fast charger
3
USB upstream
4
Audio Out
5
Audio input
6
VGA input
7
DP IN 2 input
8
DP IN 1 input
9
HDMI 2 input
10
HDMI 1 input
11
Kensington anti-theft lock
12
Power Switch
13
AC Power input
USB Hub
USB A-B
2
1
HDMI
or
or
USB
USB
1
2
USB UP
Connect to PC
1. Connect the power cord to the back
of the display firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the display signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your display into a
nearby outlet.
5. Turn on your computer and display.
If the display displays an image,
installation is complete.
4
USB hub
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Sleep and
Power Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in “ON” state, please go to OSD Menu,
then select “USB standby mode”, and
switch it to “ON” state. Somehow if
your monitor reset to factory setting,
ensure to select “USB standby mode”
to “ON” state in OSD menu.
5
USB charging
This display has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon
). You
can use these ports to charge your
Smart phone or power your external
HDD, for example. The display must be
powered ON at all times to be able to
use this function.
