Please read the following operating instructions carefully. They will help
you to get the best performance from this professional quality vacuum
cleaner and to maintain it in optimum condition.
Follow these simple steps for easy and effective
operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is correctly located and the
flexible ring provides a proper seal when the lid is closed. For optimum
filtration and maximum hygiene, it is advisable to use a paper vacuum
bag in addition to the standard cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making
sure that the cardboard disk is centered on the flexible sealing ring.
When you replace the lid, the short nozzle in the center of the lid will be
forced into the central hole of the cardboard disk of the paper vacuum
bag thus providing a tight seal. Make sure the paper vacuum bag is tight-
ly secured over the short nozzle before vacuuming.
Lock the lid down with the two latches. Always ensure that the vacuum
bag is empty before vacuuming. Your Backpack vacuum has been fitted
with a thermal overload switch to protect the motor against damage
should the airflow be blocked for extended periods. This may occur if the
vacuum bag is overfull or if the vacuum hose is blocked. The vacuum
motor will stop before it can get too hot. If this happens, empty and thor-
oughly clean the vacuum bag or free any blockage and ensure that ade-
quate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
1.
The vacuum hose is fitted into the cuff in the lid. It should not
be necessary to remove the hose in normal operation.
2.
Place the Backpack vacuum on your back, adjust the shoulder straps
until you feel comfortable and then tighten the waist belt. The
Backpack vacuum is designed to ride higher on your back for
maximum comfort.
3.
Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power
cord in good condition. This unit ships with a 50' 16AWG x 3 conductor
SJT extension cord. Always use a 16x3 SJT extension cord when
operation this unit.Use care when pulling the cord around sharp
edges and through doorways
Never operate the Backpack vacuum if the
power cord is damaged in any way.
4.
Attach the extension wand to the hose and fit the floor tool or
any of the other vacuuming accessories on the wand.
5.
Turn the vacuum on. The toggle switch is located on the switch box.
You may clip the switch box to the waist belt.
OPERATION INSTRUCTIONS
Turn off main power
switch and unplug unit
from wall outlet.
Remove vacuum hose
from top of unit.
Release the two
latches and lift off lid.
Separate lid from paper
bag insert and dispose
of paper bag.
Remove cloth filter bag,
clean, dust and replace.
Insert new paper bag
making sure to align lid
nozzle with bag hole and
replace latches.
