Philips BDP7320/F7, Service Manual

Page: 19 / 81

1-8-1 E5SK0TR
TROUBLESHOOTING
FLOW CHART NO.2
The fuse blows out.
After servicing, replace the fuse.
Check the presence that the primary component
is leaking or shorted and service it if defective. Check the presence that the rectifying diode or
circuit is shorted in each rectifying circuit of
secondary side, and service it if defective.
FLOW CHART NO.3
When the output voltage fluctuates.
Yes
No
FLOW CHART NO.4
When buzz sound can be heard in the vicinity of power circuit.
Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary
side, and service it if defective. (D1011, D1013, D1014, D1018, D1023, IC2601, IC2602, IC2640, IC2660,
Q1011,Q2603, Q2604, Q2606)
Does the photo coupler circuit on the secondary
side operate normally?
Check IC1001, IC1003, D1006 and their periphery,
and service it if defective.
Check IC1003, IC1011 and their periphery,
and service it if defective.
FLOW CHART NO.5
-FL is not outputted.
Is -30V voltage supplied to the anode of D1018?
Check D1009, D1018, C1021 and periphery circuit,
and service it if defective.
Check for load circuit short-circuiting or leak, and
service it if defective.
Yes
No
FLOW CHART NO.1
The power cannot be turned on.
Is the fuse normal?
Is normal state restored when once unplugged
power cord is plugged again after several seconds?
Is 5V voltage outputted to the cathode of D1011?
See FLOW CHART No.2 <The fuse blows out.>
Check if there is any leak or short-circuiting on the
primary circuit component, and service it if defective.
(IC1001,Q1001, Q1002, T1001, D1001, D1002,
D1003, D1004, D1007, C1010, R1013)
Check each rectifying circuit of the secondary circuit
and service it if defective.
Yes
Yes
Yes
No
No
No