Philips BDP7320/F7, Service Manual

Page: 11 / 81

1-5-1 E5SK0DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2), (L-3), (L-4)
and (L-5) are fragile. Be careful not to break them.
2. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
3. When reassembling, be sure to use the original
screws or specified screws listed in the parts
list.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 6(S-1) ---
[2] Front Unit D2
*4(L-1), *2(L-2),
*CN1004, *CN5000
1
[3]
Front-A
CBA
D3
*2(L-3), Insulation
Sheet
1
[4]
Front-B
CBA
D3
*4(L-4), *CN3003,
*CN6001
1
[5] LED CBA D3 *2(L-5) ---
[6]
Front
Assembly
D3 ---------- ---
[7]
Multi Audio
CBA
D4
3(S-2), (S-3),
*CN7001, *CN7002,
Locking Card Spacer
---
[8] Rear Panel D5
(S-4), 3(S-5), (S-6),
2(S-7), *CN1005
3
[9]
DC Fan
Motor
D5
(S-8), Fan Cover,
Fan Plate
---
[10]
BD Main
CBA & BD
Mechanism
Assembly
D6
4(S-9), 2(S-10),
*CN6101, *CN7101,
*CN7601,
Audio PCB Holder
2
[2] Front Unit
[1] Top Cover
[8] Rear Panel
[7] Multi Audio CBA
[11] AV CBA
[10] BD Main CBA &
BD Mechanism Assembly
[3] Front-A CBA
[4] Front-B CBA
[5] LED CBA
[6] Front Assembly
[9] DC Fan Motor
[12] Power Supply CBA
[11] AV CBA D7
4(S-11), Desolder,
Main PCB Bracket
---
[12]
Power
Supply
CBA
D7 2(S-12), Power Cover ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note