EN
50
11.8. Restore Default Settings
Q
(home)
“Setup”
“Player Settings”
“System”
“Default Settings”
This unit can be reset to its factory default state.
1.
Use
[
0
/
1
]
to select “Setup” in the home menu,
then press
[OK]
.
2.
Use
[
K
/
L
]
to select “Player Settings”, then press
[OK]
.
3.
Use
[
K
/
L
]
to select “System”, then press
[OK]
.
4.
Use
[
K
/
L
]
to select “Default Settings”, then press
[OK]
.
5.
Use
[
0
/
1
]
to select “Yes”, then press
[OK]
.
• Confirmation message will appear. Press
[OK]
to
complete the setting.
6.
Press
[
Q
(home)]
to exit.
11.9. License & Digital Rights Mgmt
Q
(home)
“Setup”
“Player
Settings”
“System”
“System
Information”
“License & Digital
Rights Mgmt”
This product includes some open source software that
is subject to the GNU General Public License (GPL), GNU
Lesser General Public License (LGPL) and/or copyright
licenses, disclaims and notices. You can confirm further
information about these in the “License & Digital Rights
Mgmt” section in “Setup” of this product. If you are
interested in obtaining GPL source code used in this
product, please contact
Open Source Team
P&F USA, Inc., PO Box 2248, Alpharetta, GA 30023-2248
USA
P&F USA Inc. does not warrant access to the Portal or to
any of the services, content, software and advertising. P&F
USA Inc. may, in its sole discretion, add or remove access
to any specific services, content, software and advertising
at any time. Although P&F USA Inc. will strive to provide a
good selection of services, content or software, P&F USA
Inc. does not warrant continued access to any specific
services, and content or software.
12. OTHER
FUNCTION
12.1. Special
mode
In Special mode, BD/DVD-Video Ratings (Parental Lock
settings), Progressive settings, and 4K60p Output settings
can be initialized.
1.
With no Disc inserted in the unit, press
[
T
(next)]
[1]
[2]
[3]
on the Remote Control.
• This unit will go into Special mode, and the
.
(standby/on)
LED on the unit will start blinking.
2.
Press
[2]
,
[3]
, or
[4]
on the Remote Control.
[2]
: Initializes the Parental Lock setting.
[3]
: Initializes the Progressive setting.
[4]
: Initializes the 4K60p Output setting.
• After initializing any of above, or If
[1]
is pressed, this
unit will exit Special mode.
Note
D
• This unit will automatically exit Special mode when:
– there is no button operation for 2 minutes.
– an invalid button is pressed on the unit or Remote
Control.