11
ᐥɻʼ
Note
To enable the EasyLink feature, you must turn on the HDMI
•
CEC operations on the TV and on other devices connected
to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press (standby) to turn on this product.
The TV (if the TV supports one-touch play)
»
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded in this product, disc play
»
automatically starts.
One-touch standby
1
Press and hold (standby) for more than 3
seconds.
All the connected devices (if the device
»
supports one-touch standby) automatically
switch to standby.
Note
Philips does not guarantee interoperability with other
•
HDMI CEC devices.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc
•
compartment.
1
Press
on the front panel to open the disc
compartment.
You may also press and hold
•
on the
remote control to open/close the disc
compartment.
2
Insert a disc with its label facing up.
3
Press
to close the disc compartment and
start disc play.
To view disc play, turn on the TV to the
•
video input.
To stop disc play, press
•
.
Set up a network
To enjoy software updates of this product and
BD-Live for certain Blu-ray discs, set up the network
connection.
Note
Ensure that the network cable is properly connected and
•
the router is switched on.
1
Connect this product to the broadband
modem or router.
2
Press to display the home menu.
3
Select
[Setup]
and press
OK
.
4
Select
[Network Setup]
, and press .
5
Select
[Network Installation]
, and press
OK
.
6
Follow the on-screen instructions to complete
the network installation.
Tip
You can check the status of the wired connection of this
•
product (see “Adjust settings” > “Network Setup” >
[View Network Settings]
).
Note
Loading BD-Live content from the internet may take
•
some time, depending on the file size and the speed of
the internet connection.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
View Network Settings
Network Installation
Video Setup
Advanced Setup
Audio Setup
Network Setup
Preference Setup
EasyLink Setup
English
EN
