Philips BDL4681XU/00, Service Manual

Page: 11 / 129

BDL4681XU LCD 11
On-Screen Display
ʳ
AUDIO MENU AU
DIOVOLUMEMUTEAUDIO
ʳ
ʳ
VOLUME
Adjust to increase or decrease the audio output level.
Use the
PLUS / MINUS button to adjust.
MUTE
To turn the mute function on/off.
Use the
PLUS / MINUS button to make selection.
AUDIO SOURCE
To select the audio input source according to the audio signal source
connected to the audio input and HDMI sockets on the monitor
Press the SET/PLUS button to open the submenu, and then press the
UP / DOWN button to toggle between
• AUDIO 1 • AUDIO 2
• AUDIO 3 • HDMI
SPEAKER
Set the monitor to play audio using the built-in (internal) speakers or
external speakers (if connected).
Use the
PLUS / MINUS button to toggle between
•
INTERNAL • EXTERNAL
•
LINE-OUT
AUDIO RESET
Reset all settings in the AUDIO menu.
Press the SET/PLUS button to open the submenu, and then press the
UP / DOWN button to make selection. Select YES and press the SET
button to restore settings to factory preset values. Press the EXIT button
to cancel and then return to the previous menu.
PIP MENU
Note: for COMPONENT, VGA, DVI-D and HDMI inputs only.
PIP SIZE
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
Use the PLUS / MINUS button to toggle between
• LARGE • MIDDLE • SMALL
PIP AUDIO
Select the audio source in the PIP (Picture-in-Picture) mode.
Use the PLUS / MINUS button to toggle between
• MAIN - select audio from the main picture
• PIP - select audio from the sub picture.
PIP RESET
Reset all settings in the PIP menu.
Press the SET/PLUS button to open the submenu, and then press the
UP / DOWN button to make selection.
Select YES and press the SET button to restore settings to factory preset
values. Press the EXIT button to cancel and then return to the previous
menu.
Note: the PIP function is only available under certain signal source
combinations as shown in the table below.