17
6. Daisy-chain function
6. Daisy-chain function
DisplayPort Multi-Stream feature
enables multiple monitor connections.
This Philips display is equipped with
DisplayPort interface and DisplayPort
over USB-C which enables daisy-
chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable
from one display to the next.
To daisy-chain monitors, first to check
below:
Make sure the GPU on your PC support
DisplayPort MST (Multi-stream
transport).
Note
•
The maximum number of
connectible monitors may vary
depending on GPU performance.
•
The maximum number of supported
monitor includes the first monitor
which is connected from the PC.
The number may vary if you connect
the first monitor from a laptop.
•
Please check with your graphic card
vendor and always update your
graphic card driver.
DisplayPort multi-streaming over
DisplayPort
DP
DP
PC
DP OUT
Display Resolution
Maximum number of external
monitors that can be supported
(Include the first monitor
connected to the desktop PC)
Extend mode (DisplayPort)
1920 x 1080 @ 60Hz
4
DisplayPort multi-streaming over USB
Type-C
USB C
USB C
DP
PC
DP OUT
Display
Resolution
Link Rate
*1
USB
Settings
*2
Maximum number
of external
monitors that can
be supported
(Include the first
monitor connected
to the desktop PC)
1920 x 1080
@60Hz
HBR2
USB 2.0
4
*3
USB 3.2
2
HBR3
USB 2.0
4
*3
USB 3.2
4
Note
1. To check link rate: press button,
select Setup > information. The
screen will show HBR3, otherwise,
the link rate is HBR2.
2. We recommend to set USB Setting
to USB 3.2, press button, select
USB Settings > USB, then select USB
3.2 which supports the LAN speed
to 1G.
3. Depends on the graphic card
capability, you may connect
maximum 4 external monitors.
To select one of DP Out Multi-stream
modes:
Press button, select Setup > DP Out
Multi-stream > Extend
.
