POWER SUPPLY
–
AC mains lead
– Remote control
Whenever convenient, use the mains supply to conserve battery life. Make sure you remove the
power plug from the set and wall socket before inserting batteries.
Main set
•
Insert 6 batteries, type
R-20
,
UM-1
or
D-cells
(preferably
alkaline) with the correct polarity.
Remote control
•
Insert 2 batteries, type
AAA
,
R03
or
UM4
(preferably alkaline).
Incorrect use of batteries can cause electrolyte leakage and will
corrode the compartment or cause the batteries to burst.
•
Do not mix battery types: e.g. alkaline with carbon zinc. Only use
batteries of the same type for the set.
•
When inserting new batteries, do not try to mix old batteries with
the new ones.
Batteries contain chemical substances, so they should be
disposed of properly.
1.
Check if the mains supply, as shown on
the type plate located on the bottom of the set
,
corresponds to your local mains supply. If it does not, consult your dealer or service centre.
2.
Connect the mains lead to the wall socket.
3.
To disconnect the mains supply, unplug the set from the wall
socket.
Auto-Standby mode
When a CD has reached the end of playback and remains in the stop
position for more than 15 minutes, the set will switch off
automatically to save energy.
The type plate is located on the bottom of the set.
USING AC MAINS
BATTERIES (NOT INCLUDED)
MAINS SUPPLY
SUPPLIED ACCESSORIES
7
AZ 6000/05
page
7
6 x D-cells - R20 - UM1
AZ6000_05-01 6/16/04 14:39 Page 7