Philips AVENT SCF883, Manual

Page: 33 / 363

- English 31 -
Problem Possible cause Solution
Steam is leaking
from the water
tank.
The water tank lid is not
closed correctly.
Close the water tank lid correctly. Make
sure the icon on the water tank lid is
lined up with the icon on the water
tank.
The jar is not assembled
correctly on the main
unit.
Place the jar correctly on the main unit.
The steam outlet on the
water tank lid is blocked
by contamination or
limescale buildup.
Clean the steam outlet on the water tank
lid.
The steam inlet on the
jar lid is blocked by
contamination�
Clean the steam inlet on the jar lid.
The ingredients
are not completely
heated through.
The pieces in the jar are
too big.
Cut the food into smaller pieces (cubes no
bigger than 1 cm).
There is too much food
in the jar.
Decrease the amount of food in the jar.
There is too much or too
little water in the water
tank.
Add the correct amount of water
according to the steaming time. Check
the recipe booklet and/or the table in
the chapter “Ingredients and steaming
time” to make sure that you add the
correct amount of water according to the
steaming time for the ingredients you
want to steam or the recipe you want to
prepare.
The steaming time is too
short.
Select a longer steaming time (30 minutes
tops).
The jar is not placed on
the main unit correctly.
Place the jar on the main unit correctly
with the jar lid on the bottom.
There is too much
limescale buildup in the
water tank.
Descale the water tank. Refer to the
section “Descaling” in the chapter
“Cleaning and descaling”.
The jar lid leaks. There is too much food
in the jar.
Switch off the appliance and process a
smaller quantity.
The jar lid is not locked
onto the jar correctly.
Place the jar lid on the jar and turn it
clockwise to close it securely.