Philips AVENT DECT SCD535/00, User Manual

Page: 10 / 216

10
E
Tip:
Switch off the nightlight when you operate the
baby unit on non-rechargeable batteries. This saves
power.
6.5 Paging the parent unit
If you have misplaced the parent unit, you can use
the PAGE button on the baby unit to locate the
parent unit.
D
Note:
The paging function only works when the parent
unit is switched on.
1
Press the PAGE button on the baby
unit (Fig. 27).
• The message ‘Paging’ and the paging symbol
appear on the displays of the baby unit
and parent unit.
• The parent unit produces a paging alert
tone.
2
To stop the paging alert tone, press the PAGE
button again or press any button on the
parent unit.
6.6 Lullaby function
D
Note:
You can also operate the lullaby function in the
menu of the parent unit (see chapter ‘Menu
options’, section ‘Lullaby function’).
1
Press the play/stop button
E
on the
baby unit to play the currently selected
lullaby. (Fig. 28)
2
To select another lullaby, press the lullaby
button
K
on the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 29)
D
Note:
If you do not press the lullaby button
K
for
more than 2 seconds, the lullaby shown on
the display starts to play.
• The number of the lullaby appears on the
display together with the lullaby symbol
K
.
• The selected lullaby is repeated 5 times in
a row.
• When you select ‘play all’, all 5 lullabies are
played once.
D
Note:
If the volume is set to a high level, the units
consume more power.
6.2 Talk function
You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
1
Press and hold the TALK button and talk
clearly into the microphone from a distance of
15-30cm (Fig. 25).
• The green LINK light starts flashing and the
message ‘Talk’ appears on the display.
2
Release the TALK button when you have
finished talking.
6.3 Sound level lights
The parent unit continuously monitors the sound
level in your baby´s room and the sound level
lights let you know if there is any activity. If your
baby cries, you see the sound level lights light up
on the parent unit.
• As long as the baby unit does not detect a
sound, all sound level lights on the parent unit
are out.
•
When the baby unit picks up a sound, one or
more sound level lights on the parent unit go
on. The number of lights that go on is related
to the loudness of the sound picked up by the
baby unit.
6.4 Nightlight
D
Note:
You can also switch the nightlight on and off in
the menu of the parent unit (see chapter ‘Menu
options’, section ‘Nightlight’).
1
Press the nightlight button
Q
on the baby unit
to switch on the nightlight. (Fig. 26)
•
Q
appears on the display of the parent unit.
2
Press the nightlight button
Q
again to switch
off the nightlight.
• The nightlight dims gradually before it goes
out completely.
•
Q
disappears from the display of the parent
unit.