•
Press and hold
AUTO SCAN
for about 3 seconds to start searchings for the
remote sensor signal.
Note:
–
Each time you change a channel,
press
RESET
both on the sensor and main
unit, and then press and hold
AUTO SCAN
on the main unit to search the
sensor.
INDOOR TEMPERATURE
The set can also automatically measure and display current temperature in
Centigrade.
•
Press
DISPLAY
to toggle the display between indoor temperature and out-
door temperature
.
•
Press and hold
DISPLAY
to display indoor temperature, outdoor temperature,
and day of week cyclically.
™
is displayed.
•
To select between oC or oF reading, use the (
oC oF
) slide switch (located in
the battery compartment).
LOW BATTERY INDICATION
When the batteries of the sensor is running low, the low battery icon will be dis-
played on the main unit, or the sensor, indicating that the batteries should be
replaced soon.
MAINTENANCE & SAFETY
• Do not expose the set to humidity, rain, sand or excessive heat caused by
heating equipment or direct sunlight.
• To clean your set, use a soft damp cloth or chamois leather. Do not use cleaning
products, which contain benzene, thinner, etc. as these may harm the housing.
ENVIROMENTAL INFORMATION
We have reduced the packaging to its minimum using only paper and cardboard.
Your set consists of materials which can be recycled if disassembled by a
specialized company.
Please observe local regulations on the disposal of
packing materials and old equipment
.
