™
Display shows the radio frequency of the last selected station briefly
before returning to the clock time. Your preset station is also shown if you
are listening to a preset station.
2.
Adjust volume by turning
VOLUME
.
3.
Press
RADIO
to switch off.
Helpful hints:
–
When clock time is displayed, to view the current radio frequency,
•
Press
RADIO
twice.
•
For preset stations, press the respective
PRESET
button once or repeatedly.
USING THE ALARM
Two different alarm times can be set. This can be useful when you and your part-
ner need to be woken up at different time. Besides, you can set different alarm
sounds respectively among tuner or sounds of nature.
SETTING THE ALARM
1.
Press and hold
ALARM 1
until hour digits start flashing.
2.
Hold down or press
/-
repeatedly to set the desired hour.
3.
Press
ALARM 1
to confirm.
™
Minute digits start flashing.
4.
Hold down or press
/-
repeatedly to set the desired minute.
5.
Press
ALARM 1
to confirm.
™
starts flashing.
6.
Press
/-
repeatedly to select the desired alarm sound.
7.
Press
ALARM 1
to confirm.
8.
Repeat the steps above but press
ALARM 2
instead of
ALARM 1
to set the
other alarm.
Helpful hints:
–
If you have selected radio as the alarm sound, make sure you have properly tuned
to a station and set the volume before turning off the radio
.
–
To check the alarm time setting for
ALARM 1
or
ALARM 2,
press
ALARM 1
or
ALARM 2
.
–
It is not possible to adjust the alarm time during an alarm call or alarm repeating mode.
