Night light
function
Rear wash/
Front wash/
Children
wash
Low water
pressure
Seat
heating
Manual
cleaning
nozzle
mode
Reset the night light assembly to
"turn on" the night light.
Reset the night light assembly to
Night light on
The night light is set to "on".
Turn on the power supply.
out too slowly
This is a normal phenomenon.
When the front or rear wash
function is activated, the nozzle
will be automatically cleaned at
Clean the screen or replace the
The screen is clogged.
Fasten the nut.
The connecting nut of water supply
hose is loosened.
Low water
temperature
Use the remote control to reset
the water temperature to a "high"
or "medium" state.
The water temperature is set to
"low" or "normal temperature".
Use the remote control to reset the
water pressure to a stronger mode.
The water pressure is set to a
lower mode.
The nozzle suddenly
stops spraying water
This is a normal phenomenon.
After 3 minutes of cleaning, the
nozzle stops spraying water and
retracts automatically.
The temperature of
the seat is not high
enough during use
Reset the seat temperature to a
higher state.
The seat temperature is set to
"normal temperature" or "low".
Over-temperature
of seat
Reset the seat ring temperature
to a lower state.
The seat temperature is set to
a higher level.
Automatic retracting
of nozzle
This is a normal phenomenon.
The nozzle will be automatically
retracted 2 minutes after manual
cleaning.
Long press”
Water
temperature
”
button, the nozzle
Remove the conductive medium
on the seat.
There are conductive media on
the seat, such as water droplets
or wet paper, etc. The sensor will
identify it as user.
13. Troubleshooting
Phenomenon
Cause
Solution
22
