11
Leakage protection test
(1) Under normal condition, press the "RESET" button on the power plug, the plug indicator
light will be green and the product will start to power on, enter the standby state;
(2)
(3) Press the "RESET" button on the power plug again, the indicator light will be green,
and the power supply of the product will be restored.
Turn on the tap
6. Connect the water
7. Switch on the plug
This picture is for
reference only
Indicator
light
Reset
button
Test
button
A.
Drill two 4.5mm diameter holes with a depth of >20mm in appropriate
positions on the wall according to the position dimensions shown.
B.
the drilled hole.
C.
Secure the remote control
screws.
D.
Battery installation
64
2- 4.5
Unit: mm
5. Install the remote control.
Swipe up to remove the remote control.
