5. Installation Steps
This product has been tested before delivered in the factory, there may be a small amount
As shown in the picture, install the expanding
ĚŏŊł֤žŭâÞĻē½Ŋâ֤½ÞčŏłŊęâĚŊłüââŊÿĚġľÞâľ֣
üâĚžŭŊüâ×ġēŊłġõžŭâÞĻē½Ŋâ×ŏŊĚġŊ
completely tightened.
installed on the ceramic for trial installation,
adjust the position, then press the side of the
product push rod to remove the product, screw
the bolts down .
3.
plate slot, push it horizontally,
till
Adjustment sheet
Bolts
Click
10
4.
Note:
Connect the strainer to the
Angle valve and connect two
water pipes.
Bidet fresh water inlet
pipe
Filter
Toilet fresh water inlet
pipe (if applicable)
